metal tag plate cleaning step-by-step procedure

importance of cleaning metal tag plates

When it comes to manufacturing and industrial sectors, metal tag plates are of common use because of their durability and long life. On the other hand, with time, dirt, grime, and other contaminants build up on these plates, affecting the metal plates' attractiveness and/or readability. learn about tag plate cleaning through the effective process to give life to old metal tag plates

Cleaning metal nameplates regularly is to keep the condition and look of them. Although they can handle tough conditions, such nameplates can become soiled. It is vital to select the relevant cleaning method corresponding with the type of used metal as (using) the wrong method would affect the nameplate and consequently present difficulties in displaying your business logo or required information.

step-by-step procedure for cleaning metal tag plate

Step 1: Knowing the Different Metal Tag Plates

first step of the cleaning process, the type of metal tag plate should be identified. ss name board, brass, aluminum, and anodized aluminum have different properties and characteristics thereby affecting the cleaning methods used. Bear in mind, that the wrong cleaning method may affect the surface and cause undesirable effects.

Step 2: Cleaning Solution Preparation

For general cleaning of metal tag plates, a mild detergent solution is enough. mix a few drops of light dish soap in warm water obtaining a very soft soapy water handy for use. Nevertheless, for solid stains or heavier soiling, opt for specialized cleaners specifically developed for the type of metal you are cleaning. Be sure to read and observe the manufacturer's guide while applying those specialized cleaners.

Step 3: Remove any debris.

Before using the cleaning solution, remove any loose debris or particles from the metal tag plates.

To remove any loose dust, dust it with a soft-bristled brush or wipe it with a lint-free cloth. Prevent the use of abrasive tools which could result in scratches or other damages.

Step 4: Abrade the Metal Tag Plate

Use a clean cloth dipped into the cleaning solution and wipe out the metal tag plate in a circular motion. Note down the marks, smears, or dirt, and remember to cover all the sides. Use a soft-bristled toothbrush or a cotton swab to clean complex patterns and those hard-to-reach places. Press lightly not to scratch the material.

 Step 5: Wash The Tag Plate

Wipe it off with clean water to completely remove any remaining soap or cleaning stuff. Use another material, for example, a cloth or sponge during the rinsing process. After rinsing, check the plate for any soiling or staining; if present, repeat the cleaning.

 Step 6: Polish and dry.

Critical after cleaning and rinsing is drying metal tag plates to prevent the appearance of wet spots and streaks. Wipe or use a hair dryer to dry the plate, on low heat to dry more quickly. For a smooth surface, use a metal polish that is designated suitably to your metal type and follow the manufacturer's directions.

 Conclusion:

Properly cleaned and maintained metal tag plates are necessary for the manufacturing and industrial sectors. The simple instructions give an idea about metal tag plate cleaning such as stainless steel, brass, aluminum, and anodized aluminum tags, restoring them to their original appearance. The right cleaning methods assist in extending their lifetime and toughness as well as readability; hence, their identification and tracking are easier and they are productive in the industries.

Connect with us

Contact Us

bharat Metal Process

phone: 04424762531

Location: No: 1880-B, 3rd Main Road, Mathur MMDA (Near to Manali Bus Depot), Chennai - 600 068, Tamilnadu, India.